Just got done installing the Nology coils and wires. Went for a three minute ride afterwards, and the bike seemed to start up faster and seems to run a lot smoother. With the exception of answering the phone and runing to the harware store (twice) for the right size bolts and a torx screw driver, it took about five minutes to install them both. I hooked up the ground strap for the wires to the bracket that use to hold the AI thing. I havent changed the spark plugs yet. I am going to use a set of Splitfire TP416B plugs. I checked with four different auto parst stores around here and it was next to impossible to find Splitfire plugs much less the ones for our bikes. So, I ordered some online.
BTW.. The bolts for the AI bracket are 6mm and the torx size for the screws that hold on the coils are t-25
Soren
