Bonneville America Forums Forums Technical Forums Accessories New Acewell Speedo

There's nothing I like better than driving my speedmasters, in my speedo's looking at the speedo.

No pictures please though, its more of a private thing between me and the bike.

Hi all,

Thought I would make this my final post since I have just got rid / traded in the speedy. Had to put the bike right back to stock so took these picks of where I ran the speedo cable from before removing it all again.

I had made a tin bracket and attached it to the speedo bolt and the other end was attached to the brake calliper bolt.



Below - Thin tin strip attached to brake bolt. I then Replaced (direct swap) one of the disk brake bolts with the Acewell M8 disk bolt magnet straight into the disk(no nead to glue).



You can see the speedo cable under the brake line, from there it just tie wrapped to the line then up into the seat , then the cable from the speedo under the tank and both clipped in under the seat.



Uploaded with ImageShack.us

I had chosen to source parts from e bay for all my mods as opposed to chopping them up so it made it easier to put it back to stock. Funny how the dealers don’t share our fine taste