JB weld still holding, but the front push rod tube (PRT) has advanced to another unacceptable running leak, after the 4th attempt at stopping. The first 7 to 10 miles, the PRT area was dry, and I thought I had it licked. After the 60 mile ride Sunday, it was a little wet or damp, then yesterday, I had to turn the bike around and head back home, as oil was flowing AROUND the cylinders, down the primary, and puddling under the carbs. Im either using the incorrect o-ring, or the PRT or cylinder base is cracked. Will removed cylinder for the 5th time Sunday morning hopefully, and not break another ring, as Im fresh out...This bike has easily exceeded my patience and is beginning to make me look foolish, don't ya'll think?
Last edited by b717doc; 05/04/2010 7:53 AM.
