Quote:

Quote:

Thanks.

I understand that bone-stock heads flow in the vicinity of 185cfm, & all-out pro-ported heads flow up to 300cfm.

Presuming that the 193 cfm figure that you found for the OEM carbs is under optimal conditions then the stock carbs are pretty much maxed out.



that is probably right, my test flow conditions are on just the carb directly open to atomsphere (no filters, air boxes, manifolds, nothing, basically air going thru a hole) so the stock carbs match fairly close to the stock heads in this respect. that said there are still performance gains to be made via the carbs even with a stock head, just there is a limit in there.




Fast Fred was making 4-5hp more on the dyno when he put bored stock carbs on a bone stock bike.

Always remember to be yourself. Unless you suck. Then pretend to be someone else.