Yep - that's the website where I got mine. My initial install investigation shows some fabrication is necessary. The existing regulator has 2 bolt holes at 8cm centers while the new regulator has 2 bolt holes at 7cm centers. Also the existing plate the regulator bolts onto has the nuts welded on. So it seems some cutting and welding may be required.
Alternatively, I am thinking of mounting the new RR onto a copper plate (in the same location) to assist as a heat sink - and I am thinking how this copper plate may be fabbed to fit the existing fixings (so the mod is reversible).
Last edited by foglefar; 12/29/2009 9:27 PM.
Cheers, Richard
~~~~~~~~~~~~
09 America, Staintune Pipes, K&N, Breathe, Hagon Nitros, AI & O2 removed, tune 20184 (modified), MTX-L a/f gauge
| 
