O.K. I'm back in one piece after taking a three day ski weekend. All the brackets are home-made, the pasta tin bracket is 1/16 x 3/4 standard stock from just about any hardware store. I stuck it in a vice and starting bending until I got the shape I wanted, then attached the brackets with the interior fender bolts. I will dhave to wait for pics until this weekend, seeing as it is dark when I leave and return from work. The seat bracket I think is a standard Sportster bracket that I cut the barrel off of and welded to my own bracket, then drilling a 10mm hole right below where the tank stops to mount the front bracket. The rear brackets are made from scrap pieces I had laying around the farm. These pieces all ready had 90s bent into them.
