Rob,
It sounds like your dealer is a bit of a jerk.... But he could get in trouble by removing your AI system. It should not void the warranty if you do it, but if he won't back you up you could have a problem.
Anyway, after you buy the kit from Brent and remove the stupid thing, save the little plastic hose and connect it between the 2 ports on your intake manifold. It helps smooth out the idle.
I had the Long TOR's on my bike for awhile and it ran fine with the stock jetting, but my pilot screws were set way too lean from the factory. If I remember correctly, the right side was nearly closed.
Here's another site with carb info. These are a little bigger than ours but the same design.
CVK40
