904cc Power and Torque Barrier

Check out the new Gallery

wicked red 1100
by mag10, August 21

Windshield I need to replace
by philwarner, May 10

first ride
by NemoJr, April 1

Steve McQueen inspired
by Feral, November 28

GaRally22
by chy, September 18

Print Thread

Re: 904cc Power and Torque Barrier RamSound #358760 10/22/2009 1:59 PM
Joined: Jan 2008 Posts: 1,174 Likes: 15 Wisconsin mag10 Learned Hand
mag10 Learned Hand Joined: Jan 2008 Posts: 1,174 Likes: 15 Wisconsin	Quote: My next shop visit will include a new dyno run for info on changes and it will go to redline. Ramsound - based on your posted torque result, (everything else being equal) if you go to redline you should be at 100hp. Unless my math is wrong. 65 ftlb x 8000/5252 = 99hp 05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter

Entire Thread
Subject	Posted By	Posted
904cc Power and Torque Barrier	Stacka	10/18/2009 2:52 AM
Re: 904cc Power and Torque Barrier	RamSound	10/18/2009 4:48 AM
Re: 904cc Power and Torque Barrier	piper1	10/19/2009 10:03 AM
Re: 904cc Power and Torque Barrier	Stacka	10/22/2009 11:37 AM
Re: 904cc Power and Torque Barrier	Zmilin	10/18/2009 5:45 AM
Re: 904cc Power and Torque Barrier	piper1	10/18/2009 7:08 AM
Re: 904cc Power and Torque Barrier	SDKimo	10/18/2009 7:09 PM
Re: 904cc Power and Torque Barrier	roadworthy	10/18/2009 8:51 PM
Re: 904cc Power and Torque Barrier	Zmilin	10/19/2009 12:23 AM
Re: 904cc Power and Torque Barrier	Stacka	10/19/2009 1:05 AM
Re: 904cc Power and Torque Barrier	piper1	10/19/2009 10:04 AM
Re: 904cc Power and Torque Barrier	roadworthy	10/19/2009 12:33 PM
Re: 904cc Power and Torque Barrier	mag10	10/19/2009 5:00 PM
Re: 904cc Power and Torque Barrier	1087	10/20/2009 1:33 AM
Re: 904cc Power and Torque Barrier	mag10	10/20/2009 2:36 AM
Re: 904cc Power and Torque Barrier	roadworthy	10/20/2009 3:20 AM
Re: 904cc Power and Torque Barrier	1087	10/20/2009 4:45 PM
Re: 904cc Power and Torque Barrier	mag10	10/20/2009 10:55 PM
Re: 904cc Power and Torque Barrier	Frank	10/20/2009 11:10 PM
Re: 904cc Power and Torque Barrier	Zmilin	10/20/2009 11:32 PM
Re: 904cc Power and Torque Barrier	mag10	10/21/2009 1:54 PM
Re: 904cc Power and Torque Barrier	erle	10/21/2009 8:52 PM
Re: 904cc Power and Torque Barrier	1087	10/21/2009 9:23 PM
Re: 904cc Power and Torque Barrier	SDKimo	10/21/2009 10:06 PM
Re: 904cc Power and Torque Barrier	mag10	10/21/2009 10:21 PM
Re: 904cc Power and Torque Barrier	1087	10/21/2009 10:49 PM
Re: 904cc Power and Torque Barrier	Gregger	10/21/2009 11:05 PM
Re: 904cc Power and Torque Barrier	mag10	10/22/2009 12:09 AM
Re: 904cc Power and Torque Barrier	1087	10/22/2009 12:19 AM
Re: 904cc Power and Torque Barrier	Stacka	10/22/2009 2:14 AM
Re: 904cc Power and Torque Barrier	1087	10/22/2009 5:45 AM
Re: 904cc Power and Torque Barrier	Stacka	10/22/2009 1:37 PM
Re: 904cc Power and Torque Barrier	RamSound	10/22/2009 1:44 PM
Re: 904cc Power and Torque Barrier	mag10	10/22/2009 6:59 PM
Re: 904cc Power and Torque Barrier	RamSound	10/22/2009 9:45 PM
Re: 904cc Power and Torque Barrier	1087	10/20/2009 11:10 PM
Re: 904cc Power and Torque Barrier	Stacka	10/21/2009 12:09 AM
Re: 904cc Power and Torque Barrier	trash	10/21/2009 1:04 AM
Re: 904cc Power and Torque Barrier	Zmilin	10/21/2009 3:03 AM
Re: 904cc Power and Torque Barrier	mag10	10/21/2009 2:00 PM
Re: 904cc Power and Torque Barrier	FrankW	10/21/2009 8:44 AM
Re: 904cc Power and Torque Barrier	Bill	10/19/2009 1:34 AM

Moderated by chy, Dinqua, freedom

Link Copied to Clipboard

Rides

Bonneville America Forums Forums Technical Forums Performance Mods 904cc Power and Torque Barrier