904cc Power and Torque Barrier

Check out the new Gallery

wicked red 1100
by mag10, August 21

Windshield I need to replace
by philwarner, May 10

first ride
by NemoJr, April 1

Steve McQueen inspired
by Feral, November 28

GaRally22
by chy, September 18

Print Thread

Re: 904cc Power and Torque Barrier 1087 #358752 10/21/2009 7:05 PM
Joined: Apr 2007 Posts: 3,063 Likes: 8 Timmins, Ontario Gregger Loquacious
Gregger Loquacious Joined: Apr 2007 Posts: 3,063 Likes: 8 Timmins, Ontario	If you guys want to go fast from corner to corner, put a 16 or 15 tooth front sprocket on your bikes. This will help with the lower torque values at low rpms. Don't forget, the bike will rev to 9000 grand. Top speed will not really suffer with the rev limit increased 1500 rpm from 7500. 12 Rocket Roadster 03 Bonneville America 69 BSA Firebird Scrambler 73 Yamaha TX 750

Entire Thread
Subject	Posted By	Posted
904cc Power and Torque Barrier	Stacka	10/18/2009 2:52 AM
Re: 904cc Power and Torque Barrier	RamSound	10/18/2009 4:48 AM
Re: 904cc Power and Torque Barrier	piper1	10/19/2009 10:03 AM
Re: 904cc Power and Torque Barrier	Stacka	10/22/2009 11:37 AM
Re: 904cc Power and Torque Barrier	Zmilin	10/18/2009 5:45 AM
Re: 904cc Power and Torque Barrier	piper1	10/18/2009 7:08 AM
Re: 904cc Power and Torque Barrier	SDKimo	10/18/2009 7:09 PM
Re: 904cc Power and Torque Barrier	roadworthy	10/18/2009 8:51 PM
Re: 904cc Power and Torque Barrier	Zmilin	10/19/2009 12:23 AM
Re: 904cc Power and Torque Barrier	Stacka	10/19/2009 1:05 AM
Re: 904cc Power and Torque Barrier	piper1	10/19/2009 10:04 AM
Re: 904cc Power and Torque Barrier	roadworthy	10/19/2009 12:33 PM
Re: 904cc Power and Torque Barrier	mag10	10/19/2009 5:00 PM
Re: 904cc Power and Torque Barrier	1087	10/20/2009 1:33 AM
Re: 904cc Power and Torque Barrier	mag10	10/20/2009 2:36 AM
Re: 904cc Power and Torque Barrier	roadworthy	10/20/2009 3:20 AM
Re: 904cc Power and Torque Barrier	1087	10/20/2009 4:45 PM
Re: 904cc Power and Torque Barrier	mag10	10/20/2009 10:55 PM
Re: 904cc Power and Torque Barrier	Frank	10/20/2009 11:10 PM
Re: 904cc Power and Torque Barrier	Zmilin	10/20/2009 11:32 PM
Re: 904cc Power and Torque Barrier	mag10	10/21/2009 1:54 PM
Re: 904cc Power and Torque Barrier	erle	10/21/2009 8:52 PM
Re: 904cc Power and Torque Barrier	1087	10/21/2009 9:23 PM
Re: 904cc Power and Torque Barrier	SDKimo	10/21/2009 10:06 PM
Re: 904cc Power and Torque Barrier	mag10	10/21/2009 10:21 PM
Re: 904cc Power and Torque Barrier	1087	10/21/2009 10:49 PM
Re: 904cc Power and Torque Barrier	Gregger	10/21/2009 11:05 PM
Re: 904cc Power and Torque Barrier	mag10	10/22/2009 12:09 AM
Re: 904cc Power and Torque Barrier	1087	10/22/2009 12:19 AM
Re: 904cc Power and Torque Barrier	Stacka	10/22/2009 2:14 AM
Re: 904cc Power and Torque Barrier	1087	10/22/2009 5:45 AM
Re: 904cc Power and Torque Barrier	Stacka	10/22/2009 1:37 PM
Re: 904cc Power and Torque Barrier	RamSound	10/22/2009 1:44 PM
Re: 904cc Power and Torque Barrier	mag10	10/22/2009 6:59 PM
Re: 904cc Power and Torque Barrier	RamSound	10/22/2009 9:45 PM
Re: 904cc Power and Torque Barrier	1087	10/20/2009 11:10 PM
Re: 904cc Power and Torque Barrier	Stacka	10/21/2009 12:09 AM
Re: 904cc Power and Torque Barrier	trash	10/21/2009 1:04 AM
Re: 904cc Power and Torque Barrier	Zmilin	10/21/2009 3:03 AM
Re: 904cc Power and Torque Barrier	mag10	10/21/2009 2:00 PM
Re: 904cc Power and Torque Barrier	FrankW	10/21/2009 8:44 AM
Re: 904cc Power and Torque Barrier	Bill	10/19/2009 1:34 AM

Moderated by chy, Dinqua, freedom

Link Copied to Clipboard

Rides

2025 Arkansas Rally
by roadworthy - 04/24/2025 7:57 PM

Bonneville America Forums Forums Technical Forums Performance Mods 904cc Power and Torque Barrier