Quote:

I'd be interested to see what the torque is, and how it compares to the latest models.



Can't speak for the T120's but the 750cc Bonnevilles from the late 70's and early 80's (the time I was working there) made 41.8 ft-lb @ 5500 rpm or thereabouts (depending on how the tooling was performing on the day)!!
That equates to around 56.61Nm in today's money....compared to the 2003 Bonneville America at 60 Nm @ 3500 rpm.
Not a lot in it as far as torque goes but the old Bonnie was down on HP compared to the Hinckley models.

Hope this helps.