Bonneville America Forums Forums Technical Forums Performance Mods Polaris Bellmouth/Intake Install

Warning!

I installed the Polaris Bellmouth. Two days later I had reason to remove the seat and found that the ECM connector had come loose from it's storage position and the connector head was lying in the bellmouth - effectively blocking 80% of the intake. With the snorkel it can't do this even if it comes off it's storage mount.

I hadn't noticed any thing different riding the bike (it may have just happened before I discovered it). In any event it's fortunate that I had only done about 10k since the installation. The little bu88er is now zip tied to the frame.

I don't know what damage this could cause (blocking the air intake) but it's worth checking and doing the zip tie thing.