Made them from 0.120" wall DOM same as I use to make rigid frames mate . Would have used 0.060" wall pieces for the bar ends but was out of stock . Plus , I have a set of Kellerman turn signals I was ummming & ahhhing about using that had an O.D. of 0.750" so it made sense to use the heavier material . Having the bars where they are cleaned up the forward view of the road and I designed them to use the stock cables so it's pretty straight forward to fit them . For my own set I use an M12 bolt with the stock triple tree reamed out to suit as it takes the stress load alot better and makes changing to aftermarket Harley risers a breeze too but for the copies I'll generally be using M10 same as stock.
Last edited by chopaweeza; 07/27/2009 2:35 AM.
