Quote:
Slides drilled to 7/32.
It seems to work well for me.
did you really drill your slides out to 7/32? that is .219 inch. It works okay?
the usual drill out is to .118 inch. approx 3MM up form the 2.5 mm stock.
05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter
| 
