from the original thread:
gunter
Quote:


Well after reading all I could,I took on the task of debaffeling my '07 America.The only big change in method was that I made my own extended 1 1/2" hole saw.I bought 2 saws [just in case] cut them in half & welded a 12" piece of pipe in between.Making a 13 1/2" holesaw.I made the first cut with a 1 1/8" saw [the outside dia.of the baffle] And followed with the 1 1/2" saw.I had both baffles on the ground in less than 10 minutes.My bikes went from sounding like a sewing machine to sounding like my old T-100....nice! If anyone out there is interested in using my little invention and are willing to pay the shipping PM me or email me direct at mswanson@snelsonco.com and I'll send one of them along....just be willing to pass it along to the next guy....see ya on the road..



http://www.bonnevilleamerica.com/forums/...rt=all&vc=1

and another thread:
burtard
Quote:


i made'm
go here,,,

http://www.bonnevilleamerica.com/forums/...ge=2#Post352569

20 bucks plus actual delivery costs


http://www.bonnevilleamerica.com/forums/...true#Post364175

$60 bucks? WTF?

Always remember to be yourself. Unless you suck. Then pretend to be someone else.