That's why I only use the MS Lower mounting brackets, and not their plexiglass lowers themselves. I make my own plexiglass flat plate that extends between the brackets and UNDER the headlight. Actually, my plexiglass flat plate only extends as wide as the lower part of my windshild, so if you don't look closely, it just looks like a long (low slung) windshield. The key to making it work though, is to overlap my plexiglass flat plate, so that it is in front of the lower edge of the windshield, thus forcing all the air upwards in front of and over the top of the windshield. --Tom
