Bonneville America Forums Forums Technical Forums Exhaust Looking for pipes

Saw a set of 2 into 1 on a customers speedy at the local dealer. They weren't done by the dealer and i was unable to get a photo. So 1000 words it will be. The pipe turned real tight of the ports and joined together on the the r/h/s level with the port. When i mean tight, it was before the frame down tubes. The cooler was removed and 2 after market ones were bolted to the front of the frame down tubes. The pipes were customs and were going to be wrapped. Once it was piped down and under the r/h foot peg there was an increase in the pipe dia. This o/d at a guess was 4.5 inches. There was a baffle plate system at the end of the pipes that gave you the option to remove or install more plates. There was and end cap on the pipe and i believe the gases were expelled out between the plates. It looked like 4.5 inch washers added onto the end of the pipes and the last one was a cap to block the pipe off. Didn't hear it running. Anyone seen or heard of this before.