Quote:
...Triumph tech at the dealer in Raleigh NC told me to remove the AI (that will reduce or eliminate the popping) and have it re-mapped by a dealer for 'TORS with AI removed'.
A couple of FYIs...
First, the Tech checked further, then apologized to me, he found there isn't a map for 'TORs without AI" for these bikes. There are for other Triumph EFI bikes, but not ours. So he felt thats why I had some of my problems when I took out the AI. The dealer I went to remapped it for "with TORs".
Second,if anyone does get a remap done, for any after market pipes, the bike (engine) must be cold. He showed me the instructions. Doing it to a hot bike will mess up the computer's baseline for learning the settings. The EFI system is a self learning one, so it needs a cold base line to start with. The procedure is to install the map cold, then let engine idle to normal op temps. He suggested riding it for about 100 miles, then try removing the AI hoses again (see next post)
Jim F
Salisbury NC/York SC
"Are you a Mod or a Rocker?"
"No, I'm a Mocker!"
| 
