Quote:
Hi everyone I'm not new to the forum but this is my first post. If this topic has already been covered forgive me. I have installed ISO grips with LED grip ends. Is there any way to run just the front turn signal without hooking up the rear signals? I'm not a great electrician so any advice would be great. 
I ran these grips and LED bar ends instead of my front turn signals. It looks good, but in my humble opinion isn't all that clearly visible from the rear, especially if your hand slides down the grip a little.
The wiring is simple. You need a load equaliser. You can buy a univesal one on ebay really cheap. If memory serves there are only 3 wires pos, neg and one which you splice into a wire off the flasher relay. The instructions come with it. I'[m hopeless at electrics, but I managed it. 
The path of excess leads to the Palace of Wisdom
| 
