Dog - no offence was intended and none is now but from your post you clearly don't know a little about how this works
There has to be flow past and through the packing - that's what it's there for - if we made a baffle that blocked the outside path it couldn't do that and would as I said adversely effect the power
We don't have off the shelf baffles, as one look will tell you they are hand welded by me - they are uniquely designed for this bike and no other
What I said is quite correct - there is no need for it to pull to one side - if you only bolt the thing in place until it is in place centrally then all is well as 08 America has noted too - if you over tighten the bolt then it will pull over but as I said before there is no need to over tighten it - it is a non issue
Brokenfixed - I appreciate the feedback people give - the entire product was designed from the feedback people on this very forum gave as to what they wanted - I was just being light hearted about it all as it is a non issue - there is nothing I didn't think of or anything badly designed (except not using a lock nut which as I also said above we have now changed) - the baffle is the way it is for a reason and it works perfectly if tightened correctly - even if over tightened it still works perfectly but just looks a bit odd if you peer down the pipe
Don't be so touchy people - every thing I said was meant light heartedly not as a dig at anyone.
