Mine kinda looked like they were spreading apart.
I loosened the hangers at the pipe, then at the hanger mount, then I loosened the pipe clamp where it slips on the header.
I adjusted as needed...sometimes with a little effort and choice words but ultimately I got them even and tight to the bike.
Adjust:
Length first...so they are even at the back of the bike.
Then twist (not so easy to do on mine) so the hanger has a touch of angle to it and the pipe is close to the position you want.
Tighten hanger at pipe.
Tighten hanger at bike (push the pipe into the position you want while tightening.
Tighten the hanger onto the pipe.
Finally, if no adjustments are needed, tighten the clamps and ride.
