|
|
 need help with my memphis shades
|
Joined: Feb 2005
Posts: 16
Complete Newb
|
OP
Complete Newb
Joined: Feb 2005
Posts: 16 |
I bought a ms pop top for my speedmaster and was wondering if anybody else had one. My question is; with ms windscreens do you have to relocate the turn signals. They seem to be in my way. Was thinking this was going to be easy but those pumpkins seem to be interfering. I'm thinking about just taking them off. Any help would be appreciated.
|
|
|
Re: need help with my memphis shades
|
Joined: Jan 2005
Posts: 1,204
Learned Hand
|
|
Learned Hand
Joined: Jan 2005
Posts: 1,204 |
Tombo, look at how I mounted my turn signals. You might like the new mounting position....You'll have to go to members galleries.
1200CC BIG BORE, W/WISECO PISTONS,.250 STROKED CRANK, PORTED/POLISHED HEADS AND LARGER VALVES, CUSTOM WELDED EXHUAST, DUAL 42MM MIKUNI CARBS.
|
|
|
Re: need help with my memphis shades
|
Joined: Feb 2005
Posts: 16
Complete Newb
|
|
OP
Complete Newb
Joined: Feb 2005
Posts: 16 |
I took a look ay your pics fred. Looks like your screen fit with the signals in place before you relocated. I'd like to keep the signals where they are for now if possible. Was your screen a 9" cutout? I took the poptop back and I'm going to go bigger with a alley cat screen. I love those 55 watts below the main headlight. Thanks for the help everybody
|
|
|
Re: need help with my memphis shades
|
Joined: Feb 2005
Posts: 16
Complete Newb
|
|
OP
Complete Newb
Joined: Feb 2005
Posts: 16 |
where do you purchase th ma's bracket? Is that ma's cycles? Do you have a part# and how did you run the wires?
|
|
|
Re: need help with my memphis shades
|
Joined: Feb 2005
Posts: 16
Complete Newb
|
|
OP
Complete Newb
Joined: Feb 2005
Posts: 16 |
thanks for the pics ron. I think i'm going to buy some of those bullet lights and try mounting where existing signals are. If it looks bad, i'll go with the ma light bar. changed from a pop top to a ms alley cat.Better size for me. I'll post some pics soon. thanks again
|
|
|
|
|
|
|
