Quote:

Sorry to bring back an old post, but does anybody have the instructions on how to install the triangle dresser bars in the above post. I ordered a used set from ebay, but of course there was no instructions. It is obvious where they attach to, but it looks like you have to remove a main engine support bolt. It looks like you may have to support the engine in some way. Also, do you have to have longer bolts than the ones in the upper part of the frame where it attaches? Also, each of these bolts have a dot of green paint on them. What does that mean? Do they have Loctite or something like that on the threads?



Instructions are here: http://triumphinstructions.com
Search for part # A9758042

All you really need is the longer bolt. They will add some material at the main engine bolt so its a good idea to get one.
No, you don't need to support the engine, its still supported at the top.
The green dots are what Triumph marks bolts and such with after assembly, not to worry.

SOLD: 07 Black BA, 39mm FCRs, TPUSA stage 1 head, TPUSA 813 cams, TPUSA 10.8:1 pistons, TTP #3 igniter, Specialty Spares Long Cannons, Tsukayu Hard Bags. 82HP/55tq NEW: 19 Goldwing Tour DCT