Quote:
What exactly is it that you have? Got pics and / or specs? 
no pix on hand. but it is a standard wiseco 989 stroker kit. it has a pair of forged 10.5:1 pistons (2MM over bore for 865) with the wrist pin offset for a 6mm stroked crank. rings, pins, iron cylinder liners and gaskets.
mrt202 - I was thinking that you already have a BB, if so you would not need to mess with the liners, just the bottom end work.
05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter
| 
