 Anyone using a Norman Hyde Cruiser Footrest Kit?
|
Joined: Jan 2009
Posts: 1
Complete Newb
|
OP
Complete Newb
Joined: Jan 2009
Posts: 1 |
This Norman Hyde kit moves both Rider footpegs back 4 inches. Good for us short folks. Norman Hyde Cruiser Footrest Kit I cannot comfortably reach the shift and brake pedals on the America as I can barely reach the footpegs. I currently ride a 1999 Legend a BMW R850R and a BMW F650GS {lowered}. Since all are Standard bikes I have no problem reaching the pegs, the ground is another story. Anyway I was hoping to get a report from another vertically challenged person who may have put these on an America or Speedmaster. TIA
Don Inamasu
Stockton, CA 95219
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Kit?
|
Joined: Jan 2005
Posts: 2,152
Oil Expert
|
|
Oil Expert
Joined: Jan 2005
Posts: 2,152 |
I haven't heard of that kit. It might be of real interest.
You might search here for mid-pegs which are a bit the same idea.
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Aug 2007
Posts: 10,728 Likes: 5
Should be Riding
|
|
Should be Riding
Joined: Aug 2007
Posts: 10,728 Likes: 5 |
There has been some talk of that set up around here before, I don't know if anyone actually broke down and bought it. Some one will chime in eventually, that's what's great about this site! Welcome to it! 
Always remember to be yourself. Unless you suck. Then pretend to be someone else.
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Jul 2007
Posts: 410
Adjunct
|
|
Adjunct
Joined: Jul 2007
Posts: 410 |
Looking at the pictures I am going to attempt to make this type of thing.... have a plan in my head.
As Im a short ****** plus I like the more upright seat position I think it will improve the handling as well.. once I start Ill take some photos and let you know how it goes..
TrOjAn
TrOjAn
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Feb 2007
Posts: 23,219 Likes: 61
Fe Butt
|
Fe Butt
Joined: Feb 2007
Posts: 23,219 Likes: 61 |
I just looked at these and looks to me like they could very easily be fabricated from a chunk of stainless plate very cheaply. Small pieces of plate are available at Ace and True Value. All you would need is a way to cut it, drill it and some time to polish it.
I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Jul 2007
Posts: 410
Adjunct
|
|
Adjunct
Joined: Jul 2007
Posts: 410 |
This is the UK mate.. getting bits of anything costs at least an arm.. sometimes a leg  I got some nice alu here.. not sure if its strong enough but easy to work with... Like I say.. Ill play around a bit and see where it leads. And as usual, cheaper the better  TrOjAn
TrOjAn
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Jun 2007
Posts: 12
Complete Newb
|
|
Complete Newb
Joined: Jun 2007
Posts: 12 |
I am in a similar situation being vertically challenged, a set of working mid pegs was manufactured for a speedmaster by Cycle Stop USA, photos were added in one of the threads. They were talking of making these in kit form but then decided against it due to insurance issues. I rang them to try and get a set of drwings to have a set manufactured in the UK, never got any drawings and never persued any further.
I now run with Triumph foot boards and a set of mid pegs that fit between the rear pregs and the sproket cover giving an alternative position on long runs therfore problem solved.
Dave
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Feb 2007
Posts: 23,219 Likes: 61
Fe Butt
|
|
Fe Butt
Joined: Feb 2007
Posts: 23,219 Likes: 61 |
Quote:
This is the UK mate..
And as usual, cheaper the better TrOjAn
But the guy who asked is from The US going by his signature.I didn't know you couldn't get small pieces of stainless somewhere in the UK for a reasonable price. Here in the US at one of the hardware stores I mentioned I can get a sheet about 1 foot by 3 feet fairly cheap.
If it's thick enough T6 aluminum it should work. If it is too thin or soft it wouldn't.
I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Jan 2005
Posts: 2,152
Oil Expert
|
|
Oil Expert
Joined: Jan 2005
Posts: 2,152 |
Quote:
I just looked at these and looks to me like they could very easily be fabricated from a chunk of stainless plate very cheaply.
woukd you also have to trim the shift linkage?
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Feb 2007
Posts: 23,219 Likes: 61
Fe Butt
|
|
Fe Butt
Joined: Feb 2007
Posts: 23,219 Likes: 61 |
Depends how far you want to move it and the angle you want the lever at. There is quite a bit of adjustment in the shift rod. I found that out when moving Wendy's back. It is possible you may have to shorten it but there again not a huge job. Could make a new one or cut the existing rod with not too much trouble. Would have to get a LH thread die for one end though.
I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Jul 2007
Posts: 410
Adjunct
|
|
Adjunct
Joined: Jul 2007
Posts: 410 |
I plan on making the shift rod shorter and also grab a second hand linkage from ebay to make up the brake linkage.. looks like theres a cam type of thing on the brake. If all goes well I plan to start next week  just got my hagon rears so want to get the bike done ready for the sun. TrOjAn
TrOjAn
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Feb 2007
Posts: 6
Complete Newb
|
|
Complete Newb
Joined: Feb 2007
Posts: 6 |
yes i bought the kit and fitted it to my bike, when the rain snow and 90mph winds stop i cant wait to get out on it. as standard my legs where just a wee bit stretched, but sitting on it now, feels great. only problem is that i had iso pegs on before and they dont fit on with the norman hyde kit, but working round it at the momen. very easy to install looks good does the job, actually chunkier than standard. and a lot easier than making your own, i just aint got the time these days, and any time i do have, i wanna ride my bike any questions just ask.
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Jan 2009
Posts: 2
Complete Newb
|
|
Complete Newb
Joined: Jan 2009
Posts: 2 |
I am considering getting a set of these myself . Have seen another version too by Rassk though about the same price. http://www.raask.com/Just have to work frst if I buy an America or a Speedmaster
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Jan 2009
Posts: 2
Complete Newb
|
|
Complete Newb
Joined: Jan 2009
Posts: 2 |
Quote:
yes i bought the kit and fitted it to my bike, when the rain snow and 90mph winds stop i cant wait to get out on it. as standard my legs where just a wee bit stretched, but sitting on it now, feels great. only problem is that i had iso pegs on before and they dont fit on with the norman hyde kit, but working round it at the momen. very easy to install looks good does the job, actually chunkier than standard. and a lot easier than making your own, i just aint got the time these days, and any time i do have, i wanna ride my bike any questions just ask.
any chance of pics fitted to the bike? One concern I had was whether they would affect ground clearance?
|
|
|
Re: Anyone using a Norman Hyde Cruiser Footrest Ki
|
Joined: Jul 2007
Posts: 410
Adjunct
|
|
Adjunct
Joined: Jul 2007
Posts: 410 |
Padwah,
Is there any chance you could post a CLOSEUP picture of the brake linkage especially the cam part that attaches to the actual brake rod (rod that goes to the cylinder).. would help me out a lot.. Thanks,
TrOjAn
TrOjAn
|
|
|
|
|
