glad to hear it. However i would recommend that you turn the signals on and let them run a while and feel the resistor to see how hot it gets to be safe. they recommend a higher wattage and while i don't know how you hooked it up, if it's across the hot/ground then they will get hot. possibly too hot which could burn it out and also could melt whatever it's touching/attched to. Just feel it and see how hot it gets after the max amount of flashing you'd ever have to do at on time. If it does get real hot go get a 25 watter. Or even higher if you want to be dead safe. After 25 they usually come encased in a brass housing and are more expensive. But in any case i'd be sure to check it to be safe.
