Going to bump this from the dead.
Got my windscreen on a while ago but haven't had time to take many pics yet.
I went with the National Cycles Switchblades Chopped Tinted windshield. I used the part numbers and info listed here and with advice from Chip and Phaedrus, I got it together. The height of this windscreen is just right for my size and I look just over the top of the screen.
Couple of notes. Those straps are truly a PITA to get started but once started, they're fine except for not a lot of adjustment downward on the shrouds. The windshield sits pretty close to the stock located turn signals and speedometer and rubbed on them. I fabbed a couple of new turn signal brackets and it fits fine now. Finally, since the mounts and windshield are meant for straight shrouds but mine were tapered, the top of the mount sat too close together and I had to slightly tweak the top of the mounting brackets on the windshield inward a little on each side to get everything to line up.
I really like this windshield in colder weather and for longer road trips. Buffeting isn't bad at all and the ability to remove it when the weather gets even warmer is what I was looking for.
