So I thought I needed an oil pressure gauge with the BB and all. Looked at all the ones out there and got ideas. Didn't quite like the ones I saw, so I made up my own mockup:
Bought a gauge that coud take 100PSI, an 8" brake line an3, an 1/8 female elbow and an adapter an3-1/8. Got some help from Ian (thanks buddy) and then good ol' Brent (thanks to you as well) could sell me a double banjo bolt that actually worked (the one I had was too short). Made my own alum(in)ium bracket (will probably make a new one later from ss) and mounted the gauge at one of the inlet bolts. I like the place it sits and it's easy to read when in the seat. At the moment the gauge is held in place by a too big hose clamp. I'll change that one later.
