i just re-jetted two motorsickles today. if you dumped the brass Philip head screws you can re-jet in 1/2 an hour. The left carb is the fun one. Do it first. Remove the inside rear screw, loosen the outside rear, then the inside front, then remove em all. When re-installing, install the front outside then the rear outside then the front or rear inside. Installing the outside rear before the inside rear, allows you to set the enricher bracket from the easy side. Then use the small side of the L to hold the screw and insert into the inside rear hole. The interplay, with the enricher bracket and the screw threads, will hold it up till you can get some turns on. A 3mm ball end driver works well to get it seated then use the L wrench to 7nm it.
Tube of java cakes.
