I painted My KZ w/ rattle canns and trust me, if you use the 1000 grit wet sand between coats it will be pimp! then for the final 2 coats use the 2000 grit. at the end use 3m hand rubbing compound. since you arnt going for the shiny look, you wont need to worry about the hand glaze.

!!!!!!!!! WORD OF CAUTION!!!!!!!!!!!!!!!

ANY RATTLE CAN PAINT NO MATTER IF ITS AUTOMOTICE IE: DUPLI COLOR OR PLASTI COAT, WILL BURNA ND STRIP WHEN GAS HITS IT. if your quick you can only get a shadow of where it hits by cleaning it quickly. it is only fuel resistant.

find a POLLY BASED rattle can.

or get a cheep gun and buy the 2 part epoxy kit.

for 300, let the pro do it.

Mal: "Y'all see the man hanging out of the spaceship with the really big gun?{ref, Jayne} Man's lookin' to kill some folk. So really, it's his will y'all should worry about thwarting."