I need some help. I removed the front wheel of my BA months ago to change out fork springs, polish forks and change brake lines. Now it is time to put it back together. I have the bike manual but the picture of the bearings and spacers is not very clear to me. When I put my front wheel on with the one spacer and bearing, the wheel slides back and forth on the axle bolt. The only way it does not slide is when the disk goes into the caliper assembly. This seems wrong to me, but I do not seem to have any "extra" parts lying on my workbench. Can someone look at their front wheel and help me out?
Thanks,
Alan
