Quote:
Quote:
I managed to install the springs in the indicator switch unit - not easy - but worth it. 
Tell us more. I couldnt see how it could be done so
please...share! Pics are good to.
Sorry No pics - But I will have a go at describing the process.
The indicator switch is white and held in by 3 screws.
Carefully remove the screws - one of them is for the horn and there is a spring under the casing. take out the white indicator switch and carefully open the switch - there are four contacts with small springs under them and they will more than likely fall out so be ready - Now you will see the existing return springs either side of the switch - remove them and install the springs that came with the unit - large end of the springs facing the switch.Now carefully put the switch back into its encloser without upsetting the four contacts. I hope all that makes sense
May you be in heaven half an hour before the devil knows your dead
| 
