Ok so I take off the front turn signals then i notice the lower cable in the throttle body assembly looks loose.
I tighten it and then adjust the other a little to give similar tension. now if i adjust either cable I either
sputter or backfire I have not touched anything on the
carbs except idle adjustment screw. I now have it set
just so it has a decent idle but bike still sputters at
idle i roll on the throttle it sputters then backfires half the time if I set the cable adjustment screws the throttle either sticks or goes to a screaming idle. What am I doing Wrong. 02 tba 600 miles nothing special done.What did I screw up And how Do I Fix it. P.S. putting signals back on first thing in the morning Could it Be A.I.? When I do get past First gear it runs fine just at idle or sputtering starting out in first .filled the tank with 91 today.
