2 wrenches.
Remove the tank.
Remove ignitor
remove plug wires
move wiring harness and relays to left side of top tube. Use painters tape to hold them up and be sure to unhook the harness from that plastic clip. this gives you room to remove the cover to the right of the sickle.
remove cam cover
remove gasket
dab some rtv on all the curves on new cam cover.
place gasket on new cam cover and press into the dabs of rtv. when you are sure the gasket is in place let it set up for the time it takes to
drink a soda
place cam cover back over camshafts
the gasket orients one way. take a picture of the gasket on the old cover so you have a point of reference. the triumph logo on the gasket tab should face you as the cover is upside down.
Think about checking the shim clearances while you are in there.
