The standard install is very easy (after you feed the wires through the bars - that part can be a PITA). If you have the instructions then all you have to do is follow them. Basically, all you have to do is feed the wires through the bar and bolt the lights on the end of the bar, connect the bar to the lower triple tree, feed the wire along the frame to the relays underneath the tank (yes, you will have to remove the tank), and swap out one of the relays with the one provided with the kit (the instructions tell you which one). If you leave the switch in the 'on' position then they will come on when you turn the ignition switch on. I have fairly long arms so turning them on and off while on the bike isn't a big deal for me either. Adding the lights (either the Triumph bar or modded aftermarket lights) is definitely a worthwhile addition, the extra light is a big improvement over the stock headlamp.
