Bought off eBay from taipei_scooter_assassins.
Very easy to wire up, but a little fiddly. I ttok them in the space behind the number plate at the side of the bracket and covered the wires from the bolt to the inside with rubber shielding. I then threaded them through the back of the reg plate holder to the inside on the fender. I then wired them up together and soldered the joint to give me two wires instead of eight. I then put shielding to cover from the reg plate down following the rear tail light wires, and then threaded them through to the rear brake. I then broke into the EARTH (BLACK) and also the LIVE (BLUE) soldered the joints and wrapped them in PVC tape. sealed the holes on the inside of the fender with copper coat to stop water penetrating..
