Quote:

I stopped mine from spinning with solder. They've held for 4 + years. I suspect you might get the same result with J-B Weld or similar epoxy. Get as much between the outer perimeter of the threaded connection / nut (?or whatever that thing is) and let it set up.



I failed to mention that in order to make a place for the solder/adhesive, or whatever you use, to get down in there, I drilled approx. 4 holes (about 1/32 - 3/64) at about 12,3,6,9 o'clock around the outer edge.

2004 Triumph Speedmaster (J Lo) 2006 Yamaha Stratoliner (Adele)