I am finally going to install the HD deuce pullback risers, (that I bought some time ago), on my Speedmaster to get a more relaxed riding position. I'm going to move the throttle
cable(s) to the right side of the tree to gain some slack.
My thought is to disconnect & then reconnect them at the hadlebar throttle locations instead of between the carbs.
Is this a difficult procedure and is there anything I need to watch out for? I know there has to be a small amout of free play retained in the cables. Looks like there are 2 nuts to come off first. Just never have done this before.
Appreciate any help
