|
|
 Speedmaster risers on America
|
Joined: Jan 2005
Posts: 1,933 Likes: 3
Learned Hand
|
OP
Learned Hand
Joined: Jan 2005
Posts: 1,933 Likes: 3 |
Yo smart guys! If I put Speedmaster risers on an Amrica will I need to get new cables and stuff or will they be long enough with stock? Anyone make similar switch?
thanks,
ed
|
|
|
Re: Speedmaster risers on America
|
Joined: Jan 2005
Posts: 1,018
Learned Hand
|
|
Learned Hand
Joined: Jan 2005
Posts: 1,018 |
I sold my speedmaster riser's to (bagirl) a while back. She put them on her america. I don't believe she had to change cable's. You might inquire with her.
|
|
|
Re: Speedmaster risers on America
|
Joined: Jan 2005
Posts: 530
Adjunct
|
|
Adjunct
Joined: Jan 2005
Posts: 530 |
i made the switch. run your throttle cables on the other side and you won't have a problem
|
|
|
Re: Speedmaster risers on America
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
Blowing gravel off rural roads
|
|
|
Re: Speedmaster risers on America
|
Joined: Jan 2005
Posts: 86
Member
|
|
Member
Joined: Jan 2005
Posts: 86 |
I put the Speedmaster risers on my BA but I also put on the Speedy bars. I have a bit (4") of excess cable. If you keep the America bars you might be able to re-route the cables to reach but I think they'll be too short. 
Kathy
|
|
|
Re: Speedmaster risers on America
|
Joined: Jan 2005
Posts: 1,933 Likes: 3
Learned Hand
|
|
OP
Learned Hand
Joined: Jan 2005
Posts: 1,933 Likes: 3 |
Thanks Smart Girls and Smart guys!
|
|
|
Re: Speedmaster risers on America
|
Joined: Jun 2005
Posts: 534
Adjunct
|
|
Adjunct
Joined: Jun 2005
Posts: 534 |
you will not need new cables on the america you will need to re route the cables
i know cos i've done it on mine check it out photo post in customs
i've had no probs and it was for free
|
|
|
Re: Speedmaster risers on America
|
Joined: Jan 2005
Posts: 356
Adjunct
|
|
Adjunct
Joined: Jan 2005
Posts: 356 |
you will need to change the cables. but if you go with a different bar around 30" you will be fine. I have 4" risers and wiskey bars and have Plenty of cable left over... 
|
|
|
|
|
|
|
