Quote:

Here is the story guys and gals.

I just completed a test on Slipstreamer Classic SS-30 shield. I found a fit but it requires that you remove your upper fork shrouds.

Before you freak on it, it really does not look bad.

There is good news as well, I have also been talking with Memphis Shades and we have come up with a mounting kit to fit this same set up without the shrouds. This will afford you the the use of the Quick Disconnect Memphis Shades offers.

I am waiting for my test kit to come so I can confirm fitment and performance for the Memphis Shades.

Slipstreamers owner has been incredibly helpful in sending me screens to test and shoot pictures of. Could not have done it without his help. He actually gave me the idea to go this direction as it is the only option available in Slipstreamer of Memphis Shades for the 07+ bikes.

I posted pictures on Sid's photo website so you can have a look at the mount and look of the Slipstreamer. So you sharpie's out there will notice right away that they didn't make and 07+ in Caspian Blue. What I did to accommodate the testing was remove my own fork shrouds. Which by the way has resulted in me eating bugs for a week while I was getting different screens delivered! Some sacrifices must be made.

Another member here also came up with a novel approach and he used a Memphis Fats and mounted it right up to Triumph Hardware! Worked great and he loves it!

Any question? I shoot them to me and I'll do my best to answer them.

eddy





Eddy,

Good luck on your screen conversion efforts. I would have waited on you, but needed a screen sooner so went with the Clearview. I'm still waiting on the screen so you may beat me too it.

Lee