Spray some WD 40 or something and let it soak for a bit.
If you dont have an EZ out you can use a regular drill bit and push it through the hole by drilling into it. Just make sure you use the smaller drill bit than the hole. Slow and careful.
SOLD: 07 Black BA, 39mm FCRs, TPUSA stage 1 head, TPUSA 813 cams, TPUSA 10.8:1 pistons, TTP #3 igniter, Specialty Spares Long Cannons, Tsukayu Hard Bags. 82HP/55tq
NEW: 19 Goldwing Tour DCT
| 
