Done it...and wiring is not too bad...just cut and solder. You will need some hollow screws though....lamp screws work great. just thread the wire through them and up along the frame. I drilled a small hole behind the peg hanger on one of the support ribs to have a wire tie to keep the wiring tidy.
Hope this helps
Are you classified as human? Negative...I am a meat popcicle.
06 Speedmaster. 790 Cams, Supertrapp Exhaust, AI removed, 150 Mains, Thruxton needles, Airbox removed with K&N Pods 180 degrees.
| 
