Bonneville America Forums Forums Technical Forums Custom Corner My Machine...in progress.

I used the centre stand holes to mount the main support for the midline pegs...The other chunk of aluminum is mounted to the lower rear peg hanger mount to keep the pegs from twisting. I do not know how the stand will mount, but I want one and will have to re-engineer the pegs if I cannot use the mouont as the anchor. If I must change the mount...I will probably fab a piece of heavy steel and mount the mid pegs forward of the rear peg hanges, using the mounting points of the rear hangers for both.

And thank you for the compliments on the air dam....still needs to be sanded and buffed, but turned out good...just hope the rest of my fibreglass work will turn out as good.