Quote: That is one badd motha' !!! That rat is classy and tuff. Is that t100 sprocket cover a direct fit? It does it for the bike? WHITEWALLS 4ever!!
The cover is a pretty much direct fit, you might need to trim a small section off the bottom back towards the rear wheel. The america has a larger frame piece crossing through there and the back corner of the cover touches it a bit...you can actually push on it and force it on but i didnt wanna do that cause it was putting a bit of lateral strain on the bolts. Also if you do buy a t100 cover make sure the bolts are included because the the t100 cover needs longer bolts than the stock cover.
Ever since i removed the side covers I knew i needed to put a smaller sprocket cover on there to slim things down a bit. And the stock black cover matches perfect with the paint so it was a no brainer. Its also good cause theres a little lip that holds the wires coming from the engine that used to be held by that little bracket. And now i have that holding up the crankcase breather.
