Can't find the most current pic of mine but my handle bars are a little different,no air pump on the side it's part of the tool kit on mine,my air cleaner is smaller and more rounded, rims are not alloy ,and my mufflers are stainless pea shooters they have a pipe in the front and then out the back. The air cleaner screws to the casting , if you look at that pic you can see the chrome tubes from the barbs to the casting below the air cleaner. The air actually flows through the casting there. The choke (I never use since the Bings have a tickler and it starts and runs on 1 kick with no choke) is part of the air cleaner. The kick starter swings out away from the bike since the engine spins inline with the frame. Cool fun little bike.
