Quote:


I am about to install my new 412:s i got from Eddy.

Do i reuse the washers and bushings from the factory shocks?

What settings do you with experience from theese found to be the best, m weight is 82 kg (180 pounds)?




Johann



It looked that the stock bushings would be a pain the tail to remove.....the new shocks will come with a few different sized bushings.

You'll find that the largest diam ones will need to be used. The shocks also come with new washers but you can use the stock ones.

Follow my directions above and you'll have no problems.

I actually like the 440's set one half turn from the lowest setting. I'm only 160lbs. It's slightly soft when you hit the bumps but they are still firm in the twisties!

-Tony