I believe I have the collars back in correctly.
It looks like they seat into the holder ever so slightly. Plumbing 101.
130 mains... BIG typo there...
Now for my big mental midget move ...
My helper being a carb guy said the Air Mixture screw should be right behind this plug. (Side of carb NOT the bottom) and he said to drill it out and I would have access to said air mixture screws). Genius that I am I did as instructed with out double checking Dinquas instructions (which are excellent) and ended up pulling out a metal plug. No idea what it plugs but it sure as heck is not the air mixture screw. That I know now is on the bottom of the carb. Question is what is that I pulled, where can I get a replacemnet? The plug that I pulled is right above and to the left of the TPS mount but on the equialent position other carb. There's a black plastic shaft that connects the two carbs in line on the inner side of the carbs. The plastic peice has a nipple that attaches to a rubber hose.. Vacuum???
If you have a plug or know where I can get it, or know what it's called I would be grateful... I looked at bikebandit and they do not show a spare part for it at all...
Thanks
