no. some leg work still needs to be preformed. I was hoping you could put the final touches on that search.
verbage...I want to write this up but Paul failed to give me the lower bearing sets pressed race, i.e. the cone. Going to google, I found
Peter Verdon's web page, discussing exactly these bearings AND replacement tapered bearings.
Firstly my prefire's headset bearings are
Top: Koyo SAC2647-1
Bottom: Koyo SAC3055-1
The 1995 Honda CBR600RR has the exact same bearings.
The website referenced above list replacement tapered bearing and seals for our bikes (really for the Honda CBR600RR).
Can you guys help with extracting the information from Peter's site?
Help I ask? Well confirm this for me please:
Tapered Headset Bearings & Seals
Cross Referenced bearings are All Balls Bearings
Top 99-3520
Bottom 99-3519
Cross referenced seals are Clark Seals
Top CSL CY32005X
Bottom CSL CY-32006 JR
I relied on Peter's measurement for the bottom bearing set as I do not have the bottom set's cone. (pressed race).
Dimensions
Top Tapered Bearing Set ID=26 mm OD=47 mm Width=15 mm (verified with caliper)
Bottom Tapered Bearing Set ID=30 mm OD=55 mm Width=17 mm
