Ok, here is the deal....on my way to work last Friday. I had some rough running, getting worse all the time. On the way home, one whole cyl drops out. ( I ride a 3 cyl). I did a bit of poking around, and found my #1 plug wire had burnt at the plug. So, I get a set of new ones, replace only #1 wire, go back to work on Tuesday. Well, on the way home, number 2 goes. So, replace that one too. And you guessed it, number 3 toast. Replace that one, and find that I am getting no fire on number 3. So, I swap around coils, and it turns out that it is only the number 3 position that is not firing. I checked the wires, and they are fine. Making the little meter beep like heck. Could this be a igniter failure? Would a igniter going bad cause things to burn up like that? Any help would be great. I'm scratching my head here.
