Over the past 3 weeks I have been doing the Wiseco BB job on my bike and whilst waiting for the barrels to come back from the machinist I thought I would have a go at removing 1 or more of the baffles from my TOR pipes.
These are the long slash cut type from approx 2003/4. The first baffle was about 12" or so down the pipes so using a length of bar with a chisel end I carefully worked around the edge until the piece came out. But behind it is long tube approx 9" long surrounded by fibreglass wadding. Question is..what do I do next? Remove the wadding and the pipe or what?...I cannot see how I can remove the pipe as there is no way of getting hold of it. Has anyone else experienced this type of TOR and how did you de-baffle them?
Any suggestions??
