Grump,
That's exactly what I bought. I replaced the rear pads @ 6K miles. I just replaced the fronts at 10,700 miles. The front brakes are not as 'strong' as the ones I just removed. I cleaned the heck out of all components with brake cleaner before reassembly. I remember the rear pads were the same after replacing, then they work just fine. So, I assume the front pads will 'seat' after a while. I have noticed a slight clicking sound coming from the front caliper. I brought the bike home and looked over the caliper and pads (without removing) and all components appear to be seated square and properly. The rotor doesn't get too hot. I took it out again and besides the slight noise, the brakes apply smoothly with no vibration in the front end etc. Again, I expect everything to be quieter and stronger after I put some miles on them. I have @ 70 miles on them right now. (FA196 front, FA214 rear).
Thanks
Jay
